The continuous development of industry will drive the development of some other industries. Our handcraft is one of them. The development in the industry is still relatively OK. So what are the relevant conditions for handling handcraft? Let's make up a small group of Jinan handicraft factory to talk about it for us!

　　手板完成后，如果需要喷漆处理，需要注意，SLA激光成型的工件不适合表面高光处理，因为SLA用的材料是一种光敏树脂，手板厂对油漆的粘附性不是太好。光泽度达不到太好的效果。

　　After the completion of the hand board, if painting treatment is needed, it should be noted that SLA laser formed workpieces are not suitable for high gloss surface treatment, because the material used in SLA is a kind of photosensitive resin, and the adhesion of the hand board factory to the paint is not very good. The gloss is not very good.

　　CNC加工的工件，其中有PP，POM材料，不适合表面做喷漆处理，材料不具有和油漆的粘附性。 手板厂在喷漆之前要进行砂纸打磨，砂纸分几种类型，有粗砂纸、有细砂纸。可将工件边沾水边打磨。用细的砂纸打磨。然后就可以喷砂，喷底灰了。如果表面是高光处理，还需打磨的更精细，然后再喷一层底漆进行打磨。

　　Parts processed by CNC, including PP and POM materials, are not suitable for surface painting treatment, and the materials do not have adhesion with paint. Before painting, the hand board factory should carry out sandpaper grinding. There are several types of sandpaper, including coarse sandpaper and fine sandpaper. The workpiece can be polished while stained with water. Grind with fine sandpaper. Then you can sandblast and spray the bottom ash. If the surface is high gloss, it needs to be polished more finely, and then spray a layer of primer for grinding.
                 

　　根据具体生产现场的条件及处理工件表面状况不同，而采取的物理手段，其主要目的是化学处理中影响处理质量和周期的控制因素，维护化学制剂的使用寿命。如：对于被处理新产品表面过多的油污、灰尘、铁屑、块锈、浮锈及过厚的氧化皮和不能酸洗的产品进行人工擦洗和去除（主要采用钢丝刷和砂布），处理后用压缩空气锈尘。

　　According to the specific production site conditions and different surface conditions of the workpiece, the main purpose of the physical means is to eliminate the control factors affecting the treatment quality and cycle in chemical treatment, and maintain the service life of chemical agents. For example, for the treated new products, excessive oil, dust, iron filings, block rust, floating rust, excessive oxide scale and products that cannot be pickled are manually scrubbed and removed (mainly using wire brush and abrasive cloth), and then the rust dust is removed by compressed air after treatment.

　　手板厂减少除油除锈液的大量损耗，避免工件过处理造成的损耗，缩短化学处理周期，提高处理液的使用寿命，预处理除油应用充分稀释的除油剂进行擦洗，严禁使用有机溶剂（如汽油、香蕉水）以避免污染除油槽液及时性表面形成有机溶剂固体份保护膜影响除油质量。

　　The handcraft factory can reduce the loss of oil and rust removal fluid, avoid the loss caused by over treatment of workpieces, shorten the chemical treatment cycle, and improve the service life of the treatment fluid. The pretreatment degreasing should be scrubbed with fully diluted degreasing agent. It is strictly prohibited to use organic solvents (such as gasoline and banana water) to avoid polluting the deoiling tank liquid and forming organic solvent solid protective film on the timely surface Quality.

　　以上就是济南手板厂的小编给大家讲解的处理手板时要相关条件是什么，希望能帮助到大家。若想了解更多，请咨询关注我们网站。

　　The above is the Jinan hand board factory's small make-up to explain to you when processing the hand board what the relevant conditions are, hoping to help you. If you want to know more, please contact our website.