在产品设计和产品研发的早期阶段，手板模型的应用不适合批量生产和加工。如果模型开放，风险很大。因此，越来越多的公司选择做手板模型来检查外观和结构，并提前抢占市场。下面山东快速成型厂家来讲讲铝合金手板的制作工艺及避免大批量生产风险相关内容。

In the early stage of product design and product development, the application of prototype model is not suitable for mass production and processing. If the model is open, the risk is great. Therefore, more and more companies choose to make prototype models to check the appearance and structure, and seize the market in advance. The following is about the manufacturing process of aluminum alloy hand plate and the related content of avoiding the risk of mass production.

铝合金手板的制作工艺

Manufacturing technology of aluminum alloy hand plate

1、CNC电脑经过CNC加工设备根据程序设定的路径，在产品的原材料的基础上进行改动，得到铝合金手板模型的雏形。

1. The CNC computer changes the raw materials of the product through the CNC processing equipment according to the path set by the program, and obtains the rudiment of the aluminum alloy hand model.

2、手工处理.在铝合金手板模型的雏形出来之后，样件的外观会有一些毛刺以及边角多余的部分，工作人员应该用砂纸磨平，使得铝合金手板模型的外观变得润滑精美。

2. Manual processing After the prototype of the aluminum alloy hand model is formed, the appearance of the sample will have some burrs and redundant edges and corners. The staff should use sandpaper to smooth it, so that the appearance of the aluminum alloy hand model becomes smooth and beautiful.

3、镭雕，便是用激光技能打掉样件外观的油漆，使样件的一部分方位透光.

3. Laser engraving is to use laser technology to remove the paint on the appearance of the sample and make part of the sample transparent

4、氧化，即阳极处理，是行使电解的效果，由于处理往后形成的氧化的耐蚀性差、硬度低，因而工艺过程中很少运用。

4. Oxidation, that is, anodic treatment, is the effect of electrolysis. Since the oxidation formed after treatment has poor corrosion resistance and low hardness, it is rarely used in the process.

5、拉丝，就是在铝合金的外观拉出一条条细痕，如许的处理会使样件的质感更好。

5. Wire drawing is to pull out fine marks on the appearance of aluminum alloy. Such treatment will make the texture of the sample better.

铝合金手板制作避免大批量生产风险

Aluminum alloy hand plate production to avoid the risk of mass production

手板模型作为前期的关键，它对产品的规划定位、本钱控制、出产出售和质量检测等工序起着重要的效果，假如你要研发一款新的的话，就得先要做少数手板来进行检验，承认无误后，再进行批量出产。

As the key of the early stage, the prototype model plays an important role in the planning and positioning of the product, cost control, production and sales, quality inspection and other processes. If you want to develop a new model, you must first do a few prototypes for inspection, and then carry out batch production after admitting that there is no error.

此面板手板的原料是abs，选用的是cnc加工的办法，其大致过程根本是这样的，先经过CNC加工将面板手板的雏形锣出来，然后用砂纸将剩余的毛刺磨掉，喷上客户要求的色彩，接着在烤炉里边烘烤一段时间，经过cnc加工出来的面板手板，不仅精度高，而且表面光泽鲜艳，比产品的原型愈加精巧。

The raw material of this panel is ABS, and the method of CNC processing is adopted. The basic process is as follows: first, the prototype of the panel is processed by CNC, and then the remaining burr is abraded with sandpaper, sprayed with the color required by the customer, and then baked in the oven for a period of time. The panel processed by CNC is not only high in accuracy, but also bright in surface luster, which is more exquisite than the prototype of the product.

经过手板制造，可以使某些规划完结但不完善的产品进行及时的批改，以防一旦投入大规模大批量出产后，才发现不美观甚无法运用导致全部作废！更多关于这方面的注意事项您可以来我们网站http://www.axcwv.cn咨询了解。

After the prototype manufacturing, some products that have completed the planning but are not perfect can be timely corrected, so as to prevent them from being found to be unsightly or even unusable once they are put into large-scale mass production! For more information, please visit our website http://www.axcwv.cn Consultation and understanding.