常见问题
产品
联系嘉瑞杰
山东嘉瑞杰机械科技有限公司
联系人:王经理
电话:0531-88670722
手机 : 15866677695
地址:济南市天桥区梓东大道鑫茂科技城143号楼102室
制作手板后处理工艺“电镀”
来源:http://www.axcwv.cn作者:山东嘉瑞杰机械科技有限公司发布时间:2022-02-26
电镀,随着科技的发展,产品外观要求越来越高。很多手板制做产品都采用这样一种表面处理方式,但是电镀对表面要求很高,电镀前的样件非常光滑,不能有任何杂质痕迹 ,然后将其浸泡在化学药水中。电镀需要注意的问题就是有些不能水镀,只能真空镀。
Electroplating, with the development of science and technology, product appearance requirements are higher and higher. There are a lot of impurities on the surface of the sample plate before electroplating, but the surface can not be soaked in any chemical treatment. The problem needing attention in electroplating is that some can't be water plated, but can only be vacuum plated.
虽然塑胶手板和金属手板都能使用电镀技术,但是因为它们之间的特性不太相同,所以在电镀的时候仍然是有区别的。塑胶手板的吸附力比较强,能够直接在手板外表电镀,金属手板如果直接电镀的话,就会容易掉落,所以金属手板在电镀之前需要喷上一层底漆,这样电镀出来的效果就会很好,防腐蚀的时间就会更长。
Although both plastic and metal hand boards can use electroplating technology, they are still different in electroplating because of their different characteristics. The plastic hand plate has strong adsorption and can be electroplated directly on the surface of the hand plate. If the metal hand plate is electroplated directly, it will be easy to fall. Therefore, the metal hand plate needs to be sprayed with a layer of primer before electroplating, so the effect of electroplating will be very good and the anti-corrosion time will be longer.


此外,依各种电镀需求还有不同的作用。举例如下:
In addition, it has different functions according to various electroplating needs. Examples are as follows:
1.镀铜:打底用,增进电镀层附着能力,及抗蚀能力。
1. Copper plating: used for backing to improve the adhesion and corrosion resistance of electroplating layer.
2.镀镍:打底用或做外观,增进抗蚀能力及耐磨能力。
2. Nickel plating: for priming or appearance to improve corrosion resistance and wear resistance.
3.镀金:完善导电接触阻抗,增进信号传输。
3. Gold plating: improve conductive contact impedance and improve signal transmission.
4.镀钯镍:完善导电接触阻抗,增进信号传输,耐磨性高于金。
4. Palladium nickel plating: improve the conductive contact impedance, improve signal transmission, and the wear resistance is higher than that of gold.
5.镀锡铅:增进焊接能力,快被其他替物取代。
5. Tin Lead Plating: improve welding ability and be quickly replaced by other substitutes.
以上就是今天带给大家的知识,济南手板专注行业多年,为用户不断的提供有价值的内容,更多内容请继续关注我们:http://www.axcwv.cn
The above is the knowledge brought to you today. Jinan Shouban has focused on the industry for many years and continuously provides users with valuable content. Please continue to pay attention to us for more content: http://www.axcwv.cn
上一篇:手板制作该如何选择颜色?
相关资讯
手板制作加工时注意事项
2024-04-11手板加工如何服务好客户?
2024-04-09手板加工的过程及方式
2024-04-06快速成型的基本原理构成有哪些?
2024-02-27工业产品设计中常见手板件的制作方式
2024-02-23ABS手板模型的优势有哪些?
2024-02-21铝合金手板模型制作手法与维护
2024-02-10铝合金手板模型的氧化工艺介绍
2024-02-10汽车手板模型制作的低压灌注工艺
2024-02-06手把手教你怎么选机箱机柜定制工厂
2024-01-27